DECR1000电控指令器是孚创公司按照船用规范,为电调主辅机、电喷主辅机设计开发的系统配套产品,自动手动操作双备份切换,遥控机旁操作无缝切换,适用于安全要求较高的船用或军用发动机转速、发电机电压的控制。
产品特点
1.调节输出电阻时,采用的是两路控制信号来调节,调节更加稳定,更加可靠。
2.通过限流控制电机最大输出扭矩,防止因过扭导致的电机和电位器损坏,更为安全、可靠。
3.选用性能耐磨型电位器,使用寿命长。
4.可兼容电子调节、手动调节电位器及CAN指令调节输出。
5.支持嵌入式安装及箱体内底座安装。
6.支持4-20mA电流输出、0.5-4.5V电压输出、CAN2指令3种输出方式。
7.带显示灯输出,数据标定接口。
DECR1000 Electronic Control Instruction Device is a product developed by Fortrust in accordance with marine specifications, designed for automatic and manual dual backup switching of electric governor primary and auxiliary engines, and common remote operation switching. It is suitable for controlling the speed of marine or military engines and generator voltage where safety requirements are high.
Product Features:
1. When adjusting the output resistance, it uses two control signals for more stable and reliable adjustments.
2. It controls the maximum motor output torque through current limiting, preventing damage to the motor and potentiometer caused by over-torque, making it safer and more reliable.
3. It uses a durable potentiometer with a long service life.
4. Compatible with electronic adjustment, manual adjustment of the potentiometer, and CAN command output.
5. Supports embedded installation and base installation inside the enclosure.
6. Supports three output modes: 4-20mA current output, 0.5-4.5V voltage output, and CAN2 command.
7. Equipped with display lights and a data calibration interface.